Blade Sharpeners

Edge Sharp Razor System Maintaining

Tue, 13 Nov 2012 16:44:31 +0000

Maintaining a razor sharp edge for your cutting blades is not very easy. A sharpened blade goes blunt in no time. More often than not you will find that that the more you sharpen the blades the blunter they get. Even commercial and high priced knife sharpening system delivers the same results. Therefore a perfect knife sharpening system is more or less elusive to the common amongst us.

Most knife sharpening systems use an abrasive material on which the knife edge is sharpened. The abrasive hone can be dry, wet oil hone or diamond dust surface. Irrespective of the surface, the key to a sharper edge lies in the angle at which you hold the knife on the abrasive surface. Most people think that the longer it is drawn on the surface the sharper it gets. This cannot be farther from the truth. For getting the sharpest edge, one has to maintain a constant angle while grinding. It is very difficult for someone to do this unless there is some fixture for maintaining this angle. This is where a knife sharpening system comes handy.

Two excellent knife sharpening systems (besides the well-known Lansky, Gatco and Furi), are the sharpening guide by Razor Edge and Edge Pro sharpening system. The sharpening guide by Razor Edge is cheaper and easier to use. It is also more compact and is perfect for normal home use. But if you want better precision for the angle setting and more selection for honing surfaces, it is better to choose the Edge Pro professional model. It is more expensive but this has its advantages. It gives a perfect edge and the sharpening speed is also fantastic. The grinding angle can be set permanently so that it is easier to sharpen the primary edge without touching the relief.

Here are some pointers for sharpening Chicago Cutlery which is commonly found in homes and in restaurants if you are using the Edge Pro knife sharpening system.

Set the honing angle to 15o on the red mark.
Use a coarse stone to grind the relief on one side of the edge.
Grind the relief on the other side of the edge when the burr begins to appear.
After this use the 180 grit and grind the relief till burr appears on both sides.
Grind the secondary edge on each side till burr appears after setting the angle to 19° blue mark.
Continue to grind till the burr disappears completely and finish off with four strokes on each side on a ceramic steel sharpener.
Your Chicago Cutlery will have the perfect edge.
Here are some more tips to get the most out of any knife sharpening system.
If you are using a grinding wheel on steel knives, it would be best to use zircon alumina grinding surface as they are more durable.
Make sure that the grit of the grinding wheel is right for the kind of knife being sharpened.
The last but not least, spend a few dollars more and buy a good quality professional knife sharpening system. The quality of your work will improve when you have sharper tools to work with and it pays dividends in the end.

One of Best Sharpening System can be found Here.

Lawn Mower Blade Balancers

Wed, 29 Jun 2011 20:59:05 +0000

For easy and simple lawn mower blade balancing here you are some very simple balancers.Anyone who sharpens lawn mower blade need some kind of tool that can easily determined the balance of blade lawnmowers.We can make this utility yourself if you have some basic knowledge and of course some of the necessary tools and materials, or we can buy this tool.In both cases we have a tool that prevents unpleasant vibrations that may occur as a result of uneven weight of the carcasses over the mower blades.Almost after each sharpening mower blades can result in unequal balance between the blade portions of the central axis of the blade.This can also happen when the use of lawn mowers that will result in tremors mowers and feel that it will fall apart at any moment. Some of the simplest balancers can be seen below.

Price: $5.07 from Amazon

Balanced blades help increase the life of your mower and reduce operator fatigue due to vibrations.Works great and very simple to use. This blade balancer has made the chore of balancening blades very easy to accomplish.

Oregon Lawn Mower Blade Balancer 42-100

__________________________________________________________________________

Price: $4.99

If you want your outdoor power equipment to last longer and do more you want Arnold parts, accessories and attachments. From basic maintenance to major innovations, Arnold has everything you need to keep equipment running the way it should and giving you the most it can season after season. With Arnold you can be certain of a correct fit and the finest design, materials and construction in every product. Plus were constantly developing new products to help you do even more. Greet tool also.

Arnold SBB-102 Lawn Mower Blade Balancer

__________________________________________________________________________

Work Sharp WSSA0002780 Belt Sharpening Attachment System Review

Thu, 16 Jun 2011 21:12:13 +0000

Work Sharp WSSA0002780 Belt Sharpening System is one of attachments for Work Sharp 3000 model of sharpener tool and Only fit to that model.No other models of Work Sharp fit this accessories.

Price: $57.95

This attachment sharpens knives & tools using a combination of flexible abrasive belts and a precision sharpening guide. This creates the sharpest blades you’ve ever had with speed, ease and repeatability. The sharpening guide is adjustable from 10° to 35° and accommodates kitchen knives, outdoor knives (hunting knives, pocket knives, filet knives, etc.) as well as scissors and serrated knives.

This sharpening system can be used without the sharpening guide for a wide array of freehand sharpening and honing tasks on many woodworking cutting tools such as marking knives and carving tools.

Kit includes:

P120 Coarse belt (one piece)
P220 Medium Grit Belt (1 piece) and
6000 Grit Honing Belt(1 piece)

- 3 total belts.Belts are 1″ x 18″ and do not fit other Work Sharp tools or accessories. These premium grade abrasives from Norton and Micro-Mesh are long lasting and designed for sharpening and honing applications. This tool is assembled and quality tested in Ashland Oregon and includes a detailed User’s Guide.

This image is attachment system itself (without work sharp 3000) which you get with user guide.This works exceptionally well for sharpening large turning tools quickly and efficiently while also providing a means to sharpen and hone carving tools, especially the smaller profiles that require a more delicate touch. This will be the difference between sharpening and ruining a valued tool.Air cooled, dry sharpening system that uses maintenance free 150mm tempered glass wheels to which you adhere PSA abrasives…

Also important Work Sharp 3000 comes with a 2 year manufacturers warranty and the following accessories:

2 tempered float glass wheels,
a “see-through” slotted wheel,
top tool rest,
crepe stick,

and PSA abrasive kit. 110V, 1/5 hp motor, 580 rpm (gear reduced), 16 lbs.

The Review

This device attaches easily to the W3000. Pretty impressive engineering. We like the system with the different belts but we are not sure it’s much better than a good electric knife sharpener. It requires a bit of skill to hold the blade at the correct angle during sharpening – especially towards the tip. It did a good job of sharpening some scissors too.This is a must for people who like a sharp knife but can’t do it very easily or fast. The belts are pretty expensive but you can buy them directly from Work Sharp instead of having to buy the three different grits when you only need one.Well made for plastic, but the light weight is very nice. This is so easy to put on and take off. Once attached, you can still use the wheel underneath to sharpen chisels and the top for minor touchups. We think it is well executed and so far. It took a little getting used to turning the knife upside down to get both sides, but you can always watch a video on this on Youtube and it is really easy to implement what you see in reality. We recommend this attachment.You can find this item on Amazon.com.

Work Sharp WS2000 Review

Fri, 22 Apr 2011 14:26:04 +0000

Work Sharp WS2000 sharpener and grinder is an easy-to-use dry sharpening and grinding system that makes it simple to maintain everything from precision carving tools to axes and lawnmower blades. WS2000 is the modern day solution to the bench grinder. Designed for the serious craftsperson as well as do it yourself, this sharpener and grinder even lets you sharpen contoured tools at home. And it’s compact enough to take with you to place where are the tools that need to be sharpen.

WS2000 is the grinding and sharpening solution for the home hobbyist and do it yourselfer who wants sharp tools quickly and easily.. Three ways to sharpen your tools: Top Side with Tool Rest, the Chisel and Plane Iron Port and the Edge-Vision Port. The WS2000 sharpens chisel and plane blades up to 1-5/8″ wide to a perfect 25° bevel angle without any set up time!. Work Sharp™ uses a powerful 1/5 HP motor and produces a max wheel speed of 1750 RPM. Work Sharp™ offers an active air cooled sharpening port with routed air flow and heat sink design to quickly sharpen your tools without overheating or damaging the steel.. This innovative, patent pending chisel sharpening method also uses a diamond lapping plate to remove the burr while you sharpen, making sharpening even faster! The WS2000 offers 2 Edge-Vision wheels (150mm) and uses both solid and slotted adhesive backed abrasives so you can quickly and easily change between coarse and fine grits.. Work Sharp™ is a quality tool and comes with a full 2 year warranty.

Review

It certainly works for me- I’m a mediocre sharpener, it turns out, when I’m left to my own devices, or even to the devices many others are successful with. I have a Veritas MKII honing guide, and I can usually get a pretty decent edge with it and waterstones or sandpaper, but it isn’t trivially easy for me and can take a while. And I find freehanding difficult unless I have a very well-established bevel to start with. So far, it seems to me that the Worksharp will do most of the work of a grinder in getting that bevel. And I am relishing the prospects both of an easier time, and less of it spent on, flattening chisel backs; and of not having to flatten my waterstones. Perhaps more skilled sharpeners than me dish their stones less when they use them, and so have less flattening to to do, and then do that more effectively- but I always seemed to spend more time than was reasonable on this particularly mindless part of the process.

I use it with four grits (120, 400, 1000, 3600- I don’t have the 6000 grit micromesh disk) for straight blades; the 120 gets rid of metal in a hurry (I was actually quite shocked at what 2 seconds on the 120 did to the bevel of a vintage Buck Bros chisel I was sharpening) and the edge is pretty damn good after the 3600. Then I work bevel and back a little with some 0.5 micron diamond paste on a piece of MDF (Veritas green stuff works too, but it doesn’t feel as flat under the blade) to get a mirror polish. This portion of the regimen I do freehand, and it’s a piece of cake to do with the big flat bevel.

Conclusion is that this is great tool for sharpening how small blade tools and larger ones.However its not perfect but in right hand can have amazing results.Also great tool for sharpen lawn mower blades.

Best Price we can find: $99.95

Click Here To Read Full Review

Lawn Mower and Garden Tools Sharpeners

Wed, 09 Mar 2011 21:35:28 +0000

Accu Sharp 060 GardenSharp Tool Sharpener

Product Description:

The GardenSharp tool sharpener is designed to sharpen single edged, hard to sharpen items in your tool shed, such as lawnmower blades, pruning shears, limb loppers, hoes, shovels, and scythes. All can be sharpened to a razor edge quickly and easily. The full length finger guard protects fingers while the reversible diamond honed tungsten carbide blade puts your cutting edge in “good as new” condition. GardenSharp will not rust and can be cleaned with soap and water or washed in a dishwasher. Florists, landscapers, and gardeners need the GardenSharp tool sharpener.

Price: $9.29

	Victorinox 47520 Fibrox 8-Inch Chef’s Knife The R H Forschner by Victorinox Chef’s Knife features an 8-inch blade that is 2-inches wide at the handle. High carbon, stainless steel blade is hand finished at Victorinox in Switzerland by skilled craftsmen. A special tempering process is used to produce an edge that can be resharpened over and over again, so the knife can keep its original sharpness throughout the entire life of the blade. $29.12 & this item ships for FREE with Super Saver Shipping. Read more… ________________________________
	Ginsu 7108 Chikara 8-Piece Stainless-Steel Knife Set with Bamboo Block Having the right tools breeds security in the kitchen. These Japanese-style cook’s knives are specialized for their dexterity in chopping, dicing, and slicing. The 8-piece set includes the following knives: 3-1/2-inch paring, 5-inch utility, 5-inch serrated, 7-inch santoku, and an 8-inch chef’s. Rounding out the set is a pair of kitchen shears, sharpening rod, and bamboo storage block. $77.44 & this item ships for FREE with Super Saver Shipping. Read more… ________________________________
	Ginsu 4817 International Traditions 14-Piece Knife Set with Block, Natural The GINSU 04817 International Traditions Bakelite 14 Piece Cutlery Set features the Symetric Edge design which integrates identical serrations expertly matched to each side of the knife’s blade. This produces a two dimensional serrated surface capable of precision center cuts. The result is no maintenance, never needs sharpening, serrated edge that perfoms with the accuracy of fine edged professional cutlery. This design is ideal for both righ and left handed use! $29.89 & this item ships for FREE with Super Saver Shipping. Read more… ________________________________
	Victorinox 47547 10-1/4-Inch Wavy Bread Knife, Black Fibrox Handle The R H Forschner by Victorinox Curved Blade Bread Knife features an 10.25-inch wavy-edge blade that is 1.25-inches wide at the handle. High carbon, stainless steel blade is hand finished at Victorinox in Switzerland by skilled craftsmen. A special tempering process is used to produce an edge that can be resharpened over and over again, so the knife can keep its original sharpness throughout the entire life of the blade. $28.94 & this item ships for FREE with Super Saver Shipping Read more… ________________________________
	J.A. Henckels International Eversharp 8-Piece Steak Knife Set Henckels International eversharp 8-piece steak knife set.The set of eight makes a great gift for newlyweds or new homeowners.Comes with Lifetime guarantee. $29.99 & this item ships for FREE with Super Saver Shipping. Read more… ________________________________
	Ginsu 4814 14-Piece Bakelite Knife Set with Block, Black Ginsu 14-Piece Bakelite Knife Block Set stocks a kitchen with most cutlery needs, and packs all knives in a contemporary black hardwood storage block. The set includes: an 8-inch chef’s knife, an 8-inch slicer, an 8-inch bread knife, a 5-inch boning knife, a 4-1/2-inch utility knife, a 3-1/2-inch paring knife, and six 4-1/2-inch steak knives and a pair of shears. $30.85 & this item ships for FREE with Super Saver Shipping. Read more… ________________________________
	Kyocera Revolution Paring and Santoku Knife Set This practical and very nice knife combo set featuring two of Kyocera’s best selling ceramic knives. A 5.5″ Santoku and a 3″ paring knife. Perfect for the home cook, these knives will be used daily, quickly becoming favorites in the kitchen. Ideal for fruits, vegetables and boneless meats. Use the Santoku for slicing, dicing, mincing, julienning and the paring knife for cutting, trimming, seeding and peeling small fruits and vegetables.It also and nice gift. Price: $74.45 Read more… ________________________________
	Shun Ken Onion Chef’s KnifeExpanded the serie to include all of the most wanted styles. This Shun Knife by Kershaw is designed by Ken Onion, one of the worlds top knife designers. The Shun Ken Onion series features the clad VG-10 blade made famous in our Shun line. But then the handsome, stick-resistant blade is combined with Ken Onion’s signature ergonomic handle design and the unique blade sweep found only in a Ken Onion knife. This patent pending design features a special angled curved bolster and specially shaped handle that fits perfectly in the hand, releasing all tension in your arm.Its pure gold, just perfect. $199.95 & this item ships for FREE with Super Saver Shipping. Read more… ________________________________

List Price:	$599.99
Price:	$539.99 & this item ships for FREE with Super Saver Shipping.
You Save:	$60.00 (10%)

Blade Sharpeners

Edge Sharp Razor System Maintaining

Lawn Mower Blade Balancers

Work Sharp WSSA0002780 Belt Sharpening Attachment System Review

Work Sharp WS2000 Review

Lawn Mower and Garden Tools Sharpeners

Lawn Mower Blade Sharpeners

Kitchen Knives

Knife Whetstone Sharpeners

Electric Knife Sharpeners

Professional Sharpener Tools